Ties for Cast-in Slots & Channels
Ancon SD21 Tie to suit 21/18 Omega Channel
Ancon 21/18 Omega Channel is a high performance, self-anchoring, cast-in channel slot suitable for use with Ancon wall ties to provide necessary restraint to the outer leaf of masonry. Wall ties used with Ancon 21/18 Omega Channel will provide safe working shear and tensile loads of 1.5kN.
Ancon 25/14, 28/15, 30/20, 38/17, 36/8 and 40/25 Channels
Ancon wall ties can also be used with our 25/14, 28/15, 30/20, 38/17, 36/8 and 40/25 channels and are references _ _ 25, _ _ 28, _ _ 30, _ _ 38, _ _ 36, _ _ 40 respectively. Wall ties used with Ancon 28/15, 30/20, 38/17 and 40/25 channel will provide safe working shear and tensile loads of up to 1.0kN, while wall ties used with 25/14 and 36/8 channels will provide up to 0.5kN. Maximum safe working loads of surface-fixed channels will be subject to suitable fixings, and appropriate fixing centres.
Ancon SD28 to suit Fastrack Channel
Ancon Fastrack Channel is built into the inner leaf of blockwork ready to take an Ancon SD28 or similar tie for the outer leaf. Fastrack can be used to overcome problems associated with coursing that may occur when one leaf of the cavity is built in advance of the other.
Ancon is a proud sponsor of the 5th International fib Congress taking place in Melbourne, Australia, from 7th to 11th October and expecting to attract 700 delegates from over 40 countries.
Available exclusively in Australia from Ancon, HALFEN HTA Anchor Channels demonstrate compliance with Australian Standard AS5216 ‘Design of Post-installed and Cast-in Fastenings’ through a new European Technical Assessment (ETA).