MBT Headed Anchors
MBT Headed Anchors
MBT Headed Anchors provide dead end embedment in concrete and can remove the need for hooked bars and thereby reduce congestion.
The Anchor comprises half an MBT coupler with a plate welded to one end which carries the full tension load of the bar when it is bearing against the concrete. The plates are supplied with a hole, allowing bars to either pass through or terminate in the coupler. The MBT Headed Anchor also has the added advantage of requiring no special bar end preparation.
MBT Headed Anchors can be used in accordance with clause 13.1.4 of AS 3600:2018 to reduce the development length of the reinforcing bar to 6 times the diameter for all sizes.
| Bar Diameter | 10 | 12 | 16 | 20 |
|---|---|---|---|---|
| Part No | MBTHA10H | MBTHA12H | MBTHA16H | MBTHA20H |
| Bar Diameter | 24 | 28 | 32 | 36 | 40 |
|---|---|---|---|---|---|
| Part No | MBTHA24H | MBTHA28H | MBTHA32H | MBTHA36H | MBTHA40H |
Latest News
Ancon extends its range of reinforcing bar couplers
Ancon has extended its range of reinforcing bar couplers and accompanying technical information offered to the local concrete industry in Australia.
Ancon Sponsors International FIB Congress, Melbourne, 7th-11th October 2018
Ancon is a proud sponsor of the 5th International fib Congress taking place in Melbourne, Australia, from 7th to 11th October and expecting to attract 700 delegates from over 40 countries.