Industrial
Fixing and support systems for industrial buildings on any scale
Industrial
Fixing and support systems for industrial buildings on any scale
Concrete and masonry construction in the industrial sector can take many forms. Many large warehouses and other steel-framed structures require heavily loaded concrete floor slabs.
Products such as Ancon reinforcing bar couplers help to reduce rebar congestion at slab joints, facilitating faster, more efficient concrete pouring. Ancon masonry supports, wall ties, windposts and restraint systems are integral to any areas of brick or blockwork.
Related Products
Lapped joints are not always an appropriate means of connecting rebar.
Reinforcing Bar Couplers
Concrete structures are designed with expansion and contraction joints to allow movement to take place.
Shear Load Connectors
The weight of a slab supported on a column induces shear stresses in the slab. These stresses, if sufficient and where additional reinforcement is not provided, would result in the column ‘punching’ through the slab.
Punching Shear Reinforcement
High Integrity Steel & Stainless Steel Fabrications
Special Fabrications
Masonry cladding on steel or concrete framed structures is normally supported by stainless steel shelf angle.
Masonry Support
Ancon Windposts span vertically between floors to provide additional lateral support for large panels of masonry or panels with openings.
Windposts
Wall ties and restraint fixings are an essential element in the stability of masonry panels.
Wall Ties & Restraint Fixings
Tie bars are increasingly being used in structures and buildings as an architectural as well as a structural element.
Tension & Compression Systems
Latest News
Catch up on the latest developments from Ancon
Christmas Shutdown 2018
The Sydney, Brisbane and Melbourne offices will close at 12:00pm on Friday 21st December 2018 and re-open at 8:30am on Wednesday 2nd January 2019. The Perth office will close at 12:00pm on Friday 21st December 2018 and re-open at 8:30am on Monday 7th January 2019.
Ancon Sponsors International FIB Congress, Melbourne, 7th-11th October 2018
Ancon is a proud sponsor of the 5th International fib Congress taking place in Melbourne, Australia, from 7th to 11th October and expecting to attract 700 delegates from over 40 countries.
HALFEN AS5216-Compliant Anchor Channels from Ancon
Available exclusively in Australia from Ancon, HALFEN HTA Anchor Channels demonstrate compliance with Australian Standard AS5216 ‘Design of Post-installed and Cast-in Fastenings’ through a new European Technical Assessment (ETA).