Ancon Anchors create an anchorage in the concrete, replacing the need for cogged or hooked bar ends. They can simplify scheduling and bar placement, and reduce congestion in the concrete.
Designed for use on 12mm to 50mm reinforcing bars. Ancon Anchors are internally threaded with metric threads to suit the BT coupler system. They create a full strength joint, the mode of failure being bar break.
Ancon Anchors are fully compliant with AS 3600: 2009 that states that providing the anchor's cross sectional area is at least ten times the cross sectional area of the bar, the development length is 0.4 times that of a straight bar.
|Anchor Length (l)||16||20||24||30|
|External Dia. (d)||38||50||64||76|
|Thread Size||M16 x 2.0||M20 x 2.5||M24 x 3.0||M30 x 3.5|
|Anchor Length (l)||33||36||42||45|
|External Dia. (d)||89||102||114||127|
|Thread Size||M33 x 3.5||M36 x 4.0||M42 x 4.5||M45 x 4.5|
Note: BTAA50 couplers can be manufactured. Contact Ancon for details.
Ancon is a proud sponsor of the 5th International fib Congress taking place in Melbourne, Australia, from 7th to 11th October and expecting to attract 700 delegates from over 40 countries.
Available exclusively in Australia from Ancon, HALFEN HTA Anchor Channels demonstrate compliance with Australian Standard AS5216 ‘Design of Post-installed and Cast-in Fastenings’ through a new European Technical Assessment (ETA).