Skip to content

QwikBrace Anchor System

QwikBrace Anchor System

QwikBrace is a high strength anchor system, featuring continuously-rolled Unicoil™ bars, for the bracing of precast wall panels.

QwikBrace Anchor System in-situ

QwikBrace system components include:

  • Unicon Precast Chair (ref. PC125, PC145)
  • QwikBrace Void Tube, length 6m (ref.UCQBT)
  • Unicoil™ QwikBrace Bar, available lengths 300mm, 600mm, 1,000mm and 5,800mm (refs. UCQBB34300,
  • UCB16600, UCQBB341000, UCQBB345800)
  • Unicoil™ Nut (ref. UC16HN)
  • Unicoil™ QwikBrace Threaded Insert, length 96mm (ref. UCQB3496Z)

Ideal for applications where high strength cast-in anchorage for the fixing of a slot-footed wall brace is required, the QwikBrace is also suitable for anchoring safety barriers, handrails and other site fixtures.

QwikBrace Anchor System Components

Performance

The smooth continuously-rolled Unicoil™ bar is easier to engage and faster to install than standard metric threaded systems; manufactured from high manganese alloy steel, it is stronger than N16 reinforcing bar. ¾" Unicoil 16 bar has a characteristic ultimate tensile strength of 156kN and a shear strength of 94kN.

With a bearing area over four times the area of the bar, the QwikBrace Ferrule is a headed anchorage that exceeds the requirements of AS3600:2009 and AS3850.1:2015.

Tightening Torque

Unlike expansion anchors, QwikBrace systems do not rely on tightening torque to prevent pull-out. To minimise loosening of the QwikBrace system under wind loads, nuts should be tightened to a torque of 95Nm or snug tightened and turned a further 1/3rd of a turn.

Edge Distances

Where possible, QwikBrace anchors should be located well away from edges at edge distances exceeding the recommended distances are available from the technical literature. Where anchors are to be located closer than the critical edge distance, refer to Ancon for guidance.

Installation

Part 1

The precast chair, threaded insert and tube is assembled squarely on the formwork. Reinforcement is located and the concrete is poured. The tube is left proud of the slab to identify the fixing location and show that the assembly remained perpendicular during casting.

Part 2

The tube is cut off flush with the slab and the Unicoil bar is passed through the void and screwed into the ferrule. The Unicoil nut secures the fixture in place. The bar and nut are re-useable.

Latest News

Lockable Dowel wins 2017 MIP Innovation Award

The Lockable Dowel has won a 2017 Most Innovative Product award in the USA. It has been named Editor’s Choice in the ‘Materials for Concrete Construction’ category.