Ancon - Building Products
Australia
United KingdomNationwide coverage. Located in Sydney, Melbourne, Brisbane and Perth.
Wall Ties & Restraint Fixings
Ties for Cavities over 150mm
Ancon Two Part Tie
The Ancon Two-Part Tie is designed to overcome the problems associated with installing long ties.
Cavities exceeding 150mm require ties in a length that can be difficult to balance and keep horizontal during installation. An Ancon Two-Part Tie has one section that is built into the inner leaf and a second, interlocking section that is fixed as the outer leaf is constructed.
Cavities exceeding 150mm require ties in a length that can be difficult to balance and keep horizontal during installation. An Ancon Two-Part Tie has one section that is built into the inner leaf and a second, interlocking section that is fixed as the outer leaf is constructed.
The inner tie is usually manufactured in lengths of 170mm. Variation in the cavity width is accommodated by the length of the outer tie. Ancon Two-Part Ties sustain loads which exceed the requirements for a Type 2 tie to BS 5628-1 for cavities up to 300mm.
An embedment of 75mm is required at each end. The Staifix TJ Insulation Retaining Clip can be supplied to fit the inner section.
An embedment of 75mm is required at each end. The Staifix TJ Insulation Retaining Clip can be supplied to fit the inner section.
www.ancon.co.uk
www.ancon.com.au
www.ancon.at
www.ancon.ch
www.anconbp.de