Ancon - Building Products

Bartec parallel threaded couplers are suited to projects which require high volumes of couplers. They produce a full strength joint and yet are one of the smallest couplers in the Ancon range. The ends of the bars to be joined are cut square and enlarged by cold forging to increase their core diameter and so ensure that the joint is stronger than the bar. The couplers are usually supplied attached to the reinforcing bar.

Bartec couplers comply in all respects to AS 3600 when used with reinforcing bars to AS 4671.

Full destructive tests have been carried out to show compliance with the following codes: ACI 349; ASME III DIV 2 (ACI 359); ACI 318;
CSA CAN 3 – N2872.

The Type A coupler is used for applications where the continuation bar can be rotated. The ends of the bars are upset and threaded for half the length of the coupler.

The Bartec Type B coupler uses the same coupler as the Type A system, but one bar is threaded for the full coupler length. It is designed for applications where it is difficult but not impossible to rotate the continuation bar.

Bartec Type C has an additional locknut and is used where the continuation bar cannot be rotated. The continuation bar is threaded for the full length of the coupler plus the length of the locknut.

Bartec couplers are also available to join bars of different diameters. Contact Ancon for details.

For details on Bartec Stainless Steel Couplers please click here.